How to Make CBD Gummies at Home

A real recipe, even per-gummy dosing, and a cost that store shelves can't touch.

Updated August 2026

Yes, you can make CBD gummies at home: a gummy base (gelatin or pectin, juice, sweetener) plus CBD isolate dissolved into a little warm MCT oil. The whole skill is doing the math — total milligrams divided by number of gummies — and mixing thoroughly so every gummy comes out even. One note up front: the FDA has not approved CBD as a food additive, so this is personal-use guidance, not a regulated food claim.

Short answer: 3 ingredients plus CBD, 20 minutes, and roughly 10x cheaper per gummy than the store. CBD isolate is the right form because it's 0% THC, tasteless, and dissolves cleanly into fats.

The recipe (makes 20 gummies)

IngredientAmountRole
Fruit juice (or water + flavoring)1/2 cupBase liquid
Gelatin (or pectin for vegan)2 tbsp / 1 tspGummy texture
Honey or syrup1–2 tbspSweetener
MCT oil (or high-proof alcohol)1 tspCarries the isolate
CBD isolate (or concentrate)200 mg20 gummies × 10 mg

Using our concentrate: 8,000 mg in a measure-and-pour bottle — 1 bottle makes 800 gummies at 10 mg each.

Steps: the 10-minute method

  1. Prep the CBD. Warm 1 tsp of MCT oil gently and stir in your isolate until fully dissolved. (If using our concentrate, it's already dissolved — skip this step.)
  2. Bloom the gelatin. Sprinkle gelatin over cold juice, let it sit 5 minutes, then heat gently until smooth. Don't boil.
  3. Combine. Stir the sweetener and the CBD oil into the base. This is the step where even mixing happens.
  4. Fill the molds. Pour into silicone gummy molds, stirring the pot between fills so the last gummy matches the first.
  5. Set. Refrigerate 30–60 minutes, pop them out, and store in a sealed container.

Dosing math: how many mg per gummy

Dose per gummy = total mg in batch ÷ number of gummies. If you add 200 mg and the recipe yields 20 gummies, each one is 10 mg. Want 25 mg each? Use 500 mg for the same batch. The only real risk is a poorly mixed batch where one gummy gets 5 mg and another gets 40 — so mix, stir, and re-stir. New to dosing? Our dosing guide covers starting ranges; gummies are no different.

Why isolate beats store-bought tincture for gummies

A tincture brings its own carrier oil and flavor into the batch, which throws off texture and taste. CBD isolate — or our isolate concentrate — adds only CBD. It's also the cheapest form of CBD by a wide margin: about $0.006/mg vs $0.10–0.20/mg in finished gummies. See the full math on our cost-per-mg page.

Store vs homemade: the cost table

Where the gummies come fromPrice per 10 mg gummyPer 20-gummy batch
Premium store-bought CBD gummies$1.00–1.50$20–30
Budget store-bought CBD gummies$0.50–0.80$10–16
Homemade with Simple Tinctures concentrate~$0.06~$1.25

FAQ

Can you make CBD gummies at home?
Yes. A basic gummy is gelatin or pectin, juice, a sweetener, and CBD isolate dissolved into a little oil or alcohol. The hard part is even dosing — do the batch math and mix thoroughly. The FDA has not approved CBD as a food additive, so treat this as personal-use guidance.
How much CBD should I put in each gummy?
Pick a target per gummy, multiply by the number of gummies, and add that many total milligrams. 20 gummies at 10 mg each = 200 mg for the batch. New to CBD? Start lower and adjust from there.
Why use CBD isolate for gummies instead of a tincture?
Isolate is 0% THC, has no hemp taste, and dissolves cleanly into a small amount of oil or alcohol. A store tincture adds its own carrier and flavor, which changes the recipe, and gives you less control over per-gummy dose.
How do I keep the CBD evenly distributed in the batch?
Dissolve the isolate fully into warm MCT oil first, stir continuously while pouring, and re-stir between mold fills. Uneven mixing is the #1 reason homemade batches have inconsistent gummies.

Get Concentrate — $49